Why an « Automatic Water Switch-breaker » ?

A « Automatic Water Switch-breaker » enables all types of leaks to be located, taps left opened as well as problems with a pipe. It turns off the water as soon as an abnormal flow of water has been identified and thus prevents damage and excessive water bills.

A few examples :

		Anti overflow : A child is running a bath. He goes away to watch television : Clip-Flow will switch off the water, before the bathtub overflows.
		Leaking toilet flushes : Clip-Flow identifies leaking toilet flushes. The reaction time is linked to the severity of the leak. Typically Clip-Flow detects the leak and switches off the water supply in 45 minutes.
		Burst pipes : Clip-Flow detects sudden increases in outflow and switches off the water supply in less than 10 seconds.
		Rupture of a hot-water tank : Clip-Flow detects sudden increases in outflow and switches off the water supply in 10 seconds.
		Garden Watering left on : Clip-Flow will cut off the water supply before the garden is flooded. Automatic watering Switch-breakered off : Clip-Flow will switch off the water if the watering sequence does not act as programmed.
		Water seepage leaks in the network : Clip-Flow will send an alarm after several hours and will switch off the water supply.
		Dripping Tap : Clip-Flow will ignore it so as to avoid unnecessary disturbance.
		Absence : Having a doubt when going away: was the water switched off before leaving ? For safety purposes, the water supply can be automatically switch off after an absence of 72 hours.
		Swimming pool : For unusually long water usage - Filling up a swimming pool, for instance - simply pressing the button on front of the device can stop Clip-Flow for 24 hours.